Note: You Scan the Cable Channels only when a Cable line or cable box is connected to the TV with a Coaxial cord...
If TV is on the HOME SCREEN then start the Setup procedure from STEP 7
IF TV displays LET'S GET STARTED SCREEN, then follow the steps below...
Step 1: Select your preferred language
Step 2: Select your Country
Step 3: Select Setup for Home Use
Step 4: Select Connect to the Internet later
Step 5: Press OK to select Let's Connect you Devices
Step 6: On Connect Devices, Select DO THIS LATER
Step 7: TV will display the HOME SCREEN, on the Home Screen select the tile Antenna TV or LIVE TV
Step 8: Read the simple on-screen instructions, Select Setup Input and then select Start finding channels.
Step 9: If prompted, select your time zone. You’ll only need to do this if the TV can’t figure out your time zone from your Internet connection
Step 10: When prompted, select whether to add analog channels 3 and 4. Select Yes Channel 3 & 4 are needed
Step 11: TV will start scanning Antenna Channels which you can Skip to commence the Cable Channel Scan. The Cable Channel Scanning may take up to 30 minutes
Comments
Please sign in to leave a comment.