Skip to main content

Cable Channel Scan: How to Scan Cable Channels?

Note: You Scan the Cable Channels only when a Cable line or cable box is connected to the TV with a Coaxial cord...

mceclip1.png

If TV is on the  HOME SCREEN  then start the Setup procedure from STEP 7

IF TV displays LET'S GET STARTED SCREEN, then follow the steps below...

Step 1: Select your preferred language

mceclip4.png

Step 2: Select your Country

mceclip5.png

Step 3: Select Setup for Home Use

mceclip6.png

Step 4: Select Connect to the Internet later

mceclip1.png

Step 5: Press OK to select Let's Connect you Devices

mceclip3.png

Step 6: On Connect Devices, Select DO THIS LATER

mceclip4.png

Step 7: TV will display the HOME SCREEN, on the Home Screen select the tile Antenna TV or LIVE TV 

mceclip2.png

Step 8: Read the simple on-screen instructions, Select Setup Input and then select Start finding channels.

mceclip0.png

Step 9: If prompted, select your time zone. You’ll only need to do this if the TV can’t figure out your time zone from your Internet connection

mceclip1.png

Step 10: When prompted, select whether to add analog channels 3 and 4. Select Yes Channel 3 & 4 are needed

mceclip2.png

Step 11: TV will start scanning Antenna Channels which you can Skip to commence the Cable Channel Scan. The Cable Channel Scanning may take up to 30 minutes

mceclip3.png

 

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.

Powered by Zendesk