Note: You Scan the Cable Channels only when a Cable line or cable box is connected to the TV with a Coaxial cord...
If TV is on the HOME SCREEN then start the Setup procedure from STEP 7
IF TV displays LET'S GET STARTED SCREEN, then follow the steps below...
Step 1: Select your preferred language
Step 2: Select your Country
Step 3: Select Setup for Home Use
Step 4: Select Connect to the Internet later
Step 5: Press OK to select Let's Connect you Devices
Step 6: On Connect Devices, Select DO THIS LATER
Step 7: TV will display the HOME SCREEN, on the Home Screen select the tile Antenna TV or LIVE TV
Step 8: Read the simple on-screen instructions, Select Setup Input and then select Start finding channels.
Step 9: If prompted, select your time zone. You’ll only need to do this if the TV can’t figure out your time zone from your Internet connection
Step 10: When prompted, select whether to add analog channels 3 and 4. Select Yes Channel 3 & 4 are needed
Step 11: TV will start scanning Antenna Channels which you can Skip to commence the Cable Channel Scan. The Cable Channel Scanning may take up to 30 minutes
